Reliable Emergency Lighting & Electrical Maintenance in the GTA
Emergency and exit lighting are critical elements for a safe escape in case of an emergency. These fixtures illuminate the way toward the means of egress during power outages. National safety codes require emergency lighting to be provided in the event of the failure of normal lighting. Canadian Industrial Fire Protection Co Inc offers you emergency lighting and electrical maintenance services in the GTA. We ensure your company is code-compliant and prepared for emergencies.
Code-compliance Requires Monthly and Annual Testing
Any loss resulting from a bulb failure or unit malfunction is too high a price to pay. Canadian Industrial Fire Protection Co Inc offers tests and inspections to keep your emergency lighting systems code-compliant and ready to function when needed. Emergency and exit lighting equipment with battery backup is required to be inspected on a monthly basis for not less than 30 seconds, and a 30-minute full-function test is required on an annual basis per NFPA standards. Only safe practices and policies supported by the NFPA standard are used when testing and inspecting your equipment.
The National Fire Protection Association (NFPA) States the Following:
A functional test shall be conducted on every required emergency lighting system at 30-day intervals for not less than 30 seconds. An annual test shall be conducted on every required battery-powered emergency lighting system. Equipment shall be fully operational for the duration of the test. Written records of visual inspections and tests shall be kept by the owner for inspection by the authority having jurisdiction.
Electrical Service Maintenance
Canadian Industrial Fire Protection Co Inc provides 24-hour customer support and is prepared to service and maintain a variety of facilities. Our service team of licensed electricians is trained to handle today’s technically demanding electrical installations. We can take care of your project whether it is the long-term maintenance of your building, replacing old wiring with a new system or making sure task critical electrical equipment is running. Fully stocked vans and a proven on-call system assure on-time and on-budget service calls. Our service division is trained to handle:
Repairs on all electrical equipment including lighting, wiring power distribution
Connection of all new equipment
Wiring and rewiring of interior or exterior alterations to offices, plants, institutions, commercial and retail buildings
Expert troubleshooting and diagnosis of electrical equipment and wiring
Routine maintenance
Bulbs and ballast change-outs
Emergency Lighting System
Canadian Industrial Fire Protection Co Inc fire equipment product lines include a full range of fire extinguishers, hoses, fire alarm and early detection systems, sprinkler systems, fire blankets, flammable liquid and acid corrosive storage cabinets, fire extinguisher cabinets and more. If there's something specific you need, we will find it for you.
8LMCE Series All-metal Combination Sign
Features
Combination Exit Sign and Power Pack
Now with dual input voltages 120/347 Vac
Based on a modular design concept, this combo unit comes pre-assembled for quick, easy installation
Metal stencil plate with a red-letter panel
Universal mounting – end, wall or ceiling
Easy access to wiring entry for all mounting options
Canopy mounting system designed specifically for ease of installation
Universal, field-selectable chevrons (knockout)
Long-life, energy-efficient, AlInGaP LED light source
Energy-efficient – complete unit consumes less than 3.5watts
Completely self-contained combo unit with sealed lead battery provides a minimum of 30 minutes of emergency lighting
Power Pack comes standard with test switch and high charge pilot light and is available in either 28, 44 or 72 watts
CSA certified, meets or exceeds C860 requirements
LMCE Series All-metal Exit Sign
Features
Now with two-wire universal AC input
Based on a modular design concept, this exit sign comes pre-assembled for quick, easy installation
Metal construction using Canadian cold-rolled steel
Universal mounting – end, wall or ceiling
Supplied standard with two metal stencil plates, red diffusing lenses and back-plate
Easy access to wiring entry for all mounting options
Canopy mounting system designed specifically for ease of installation
Universal, field-selectable chevrons (knockout)
Now with long-life, energy-efficient, AlInGaP technology LED light source
Energy-efficient – consumes less than 3 watts in AC or DC mode
Normal AC and emergency DC operation – 120 to 347 Volt AC input; 6 to 24 Volt DC input
Also available with power pack; see 8LMCE catalogue sheet
CSA certified, meets or exceeds C860 requirements
RGS Series 6, 12 And 24 Volts
Features
Rugged steel cabinet with corrosion-resistant undercoating – standard colour is factory white with polar white and black available as options
Removable front panel on cabinet provides easy access and allows the unit to be mounted at ceiling height
Solid-state, pulse-type charger – current-limited, temperature-compensated, short-circuit proof and reverse-polarity protected
Unit comes standard with electronic lockout and brownout circuits
Sealed, dust-proof transfer relay, test switch and LED indicator lights
Long-life, maintenance-free, lead-acid battery
Wide range of lamp heads available including tungsten, MR16 and halogen
Standard 120/347 Vac input voltage with line cord kit
NEXUS® compatible (for more information on NEXUS®, please consult factory)
10-year life expectancy, maintenance-free emergency lighting units
CSA C22.2 No. 141 certified
