Hoses and accessories


Canadian Industrial Fire Protection Co Inc. fire equipment product lines include a full range of fire extinguishers, fire hoses, fire alarm and early detection systems, sprinkler systems, fire blankets, flammable liquid and acid corrosive storage cabinets, fire extinguisher cabinets and more. If there's something specific you need, we will find it for you.

Please choose from the list below of hoses and accessories we currently offer.
STYLE V SWING TYPE HOSE STORAGE REELS

STYLE V SWING TYPE HOSE STORAGE REELS
  • Open sides allow faster hose drying, to prevent mold and mildew
  • Red polyester powder coat finish
  • Wall mounting is standard
  • Style V5 (when used with 1.5" hose only), has a space between the reel sides to accommodate two widths of hose side by side, for maximum capacity in minimum space

SINGLE JACKET ATTACK HOSE

SINGLE JACKET ATTACK HOSE
  • SINGLE JACKET polyester industrial fire hose with an ozone- resistant EPDM rubber lining.
  • Spun polyester yarn in the jacket offers superior strength and wear characteristics.
  • Designed for interior or exterior fire protection, Attack Hose-FAS is NFPA compliant as an attack hose.
  • The polyester construction is mildew-and rot-proof.
  • Outstanding abrasion resistance Tough, dependable and lightweight attack hose.
  • A stripe of a contrasting color running the full length of the hose can be woven into the jacket.
  • Meets NFPA recommendations for pump panel identification.
  • Comes standard with Aluminum Couplings

RACK HOSE

RACK HOSE
  • RACK HOSE-FBS is an all polyester single jacket interior protection hose for buildings and plants.
  • The Rack Hose FBS is of light weight and compact, approximately half the weight of standard rubber lined single jacket hose.
  • Resistant to most chemicals, petrol products, ozone & U.V. exposure, hydrolysis, and rot & mildew.
  • Our liner process produces an amazingly thin but smooth inner waterway, yielding an extremely low friction loss for maximum flow.
  • Tough and ready for action but light in weight.
  • Strong, compact and practical, and will fit on most hose storage devices.

DOUBLE JACKET ATTACK HOSE

DOUBLE JACKET ATTACK HOSE
  • DOUBLE JACKET hose is constructed of 100% high tensile strength polyester yarns, both warp and filler, and lined with a high-tech EPDM tube.
  • Its engineered design guarantees minimum weight with maximum durability and flexibility.
  • The FAD hose and its assemblies under this specifications shall be constructed with superior quality materials. manufactured in accordance with National Fire Protection
  • Association (NFPA) 1961 standard, latest edition within our ISO-9001:2000 certified quality assurance system.
  • 100% mildew- and rot-proof
  • Outstanding abrasion resistance
  • Tough, dependable and lightweight attack hose

STANDPIPE ANGLE VALVES > CAST BRASS ANGLE HOSE VALVES FEATURES

STANDPIPE ANGLE VALVES
  • Underwriters Listed and Factory Mutual approved
  • New York City Board of Standards and Appeals approved
  • For pressures up to 300 lbs.
  • Cast brass with an aluminum wheel

STANDPIPE ANGLE VALVES > FORGED BRASS ANGLE HOSE VALVES FEATURES

STANDPIPE ANGLE VALVES
  • Underwriters Listed and Factory Mutual approved
  • For use with a fire hose rack assembly, or as a fire department outlet connection
  • For pressures up to 300 PSI
  • Forged brass with a aluminum, red painted handwheel

FORESTRY FIRE HOSE-HBS

FORESTRY FIRE HOSE-HBS
  • Lightweight single jacket 100% spun polyester hose lined with TPU elastomer.
  • Optional Wisentec treatment greatly increases abrasion, heat, and flame resistance while virtually eliminating water pick-up. When used, HBY forestry fire hose meets the new “Type ll” specification, is protected from mildew and no drying is required.
  • Tightly woven cover is specially treated for enhanced durability, reduced friction when dragging, and resistance to ozone, weathering, mildew, aging, and regular abrasion.
  • PU tube provides much better resistance to punctures, mildew, petroleum, solvents, and aging as compared to conventional rubber fire hoses - and it is only a fraction of the weight and is much more compact.
  • A stripe of a contrasting color running the full length of the hose can be woven into the jacket.
  • Meets NFPA recommendations for pump panel identification.
    Comes standard with aluminum couplings

DU2 DURA HOSE

DU2 DURA HOSE
  • DURABLE HOSE-DU2 is a 3-ply nitrile rubber municipal fire hose with both the cover and liner extruded independently and double vulcanized along with high tensile strength polyester reinforcement for maximum durability and flexibility.
  • Ribbed Nitrile rubber cover greatly increases abrasion resistance, provides long service life and the tightly woven reinforcement resists puncture.
  • Smooth liner keeps friction loss to a minimum and is the best-in-kind.
  • Hose remains flexible to temperatures as low as -5°F (-20°C) and is resistant to ozone, oxidation, and most chemicals or petroleum products.
  • Different nitrile/PVC blend ratio results in different applications.
  • Durable Hose-DU2 is manufactured in accordance with NFPA 1961 standard, latest edition within our ISO-9001: 2000 certified quality assurance system.
  • Comes standard with brass couplings

HDR-18 & HDR-24 SWING TYPE REELS

HDR-18 & HDR-24 SWING TYPE REELS
  • One piece wall bracket (14 gauge), for easier mounting
  • 180 degree swing will also take pipe clamps up to 3" Compact size
  • Smaller reel hub to allow more hose storage
  • Baked red enamel finish
  • Solid steel (14 gauge) support arms
  • Welded construction – rim (18 gauge) hub cap, welded spokes form solid wheels, seperated by a molded poly hub and bolted together to form a sturdy unit
  • Hose is double rolled from the center of length coupled to valve and nozzle. Hose is ready for action when completely removed and valve is open

FIRE HOSE, EXTINGUISHER AND VALVE CABINETS

FIRE HOSE, EXTINGUISHER AND VALVE CABINETS
  • Available in grey baked enamel or stainless steel finish
  • Full glass door or full metal door
  • Glass not included
  • Cylinder lock available for valve cabinets
  • Break glass door and lock.

    Standard Models Include: Full Glass Front and Grey Enamel Finish.

    Custom Fronts: FM - Full Metal / BG - Break Glass

    Custom Finishes: SS - Stainless Steel / R - Red Enamel / W - White Enamel

service your fire extinguishers, it could save a life!
GREATER TORONTO
416-347-2617

DURHAM REGION
905-424-3021
follow us at:
FaceBook Linkedin
©2013 copyright canadian industrial fire protection co. inc. - website designed by www.mykull.com